Need help with an order or return?
Use one of the options below for the fastest resolution.
If your request isn’t covered, you can contact us using the form below.
Customer support
Monday–Friday, 7:30 am–3:30 pm ET
Use one of the options below for the fastest resolution.
If your request isn’t covered, you can contact us using the form below.
Monday–Friday, 7:30 am–3:30 pm ET
| Nozzle Size | Flow | Operating Pressure Range (psi) | |||||||||
| Orifice | Flow rate | 362 | 435 | 507 | 580 | 652 | 725 | 797 | 870 | 942 | 1015 |
| 0.15 mm (0.006″) |
L/min | 0.03 | 0.033 | 0.036 | 0.038 | 0.04 | 0.043 | 0.045 | 0.047 | 0.049 | 0.05 |
| US gpm | 0.008 | 0.009 | 0.009 | 0.01 | 0.011 | 0.011 | 0.012 | 0.012 | 0.013 | 0.013 | |
| 0.20 mm (0.008″) |
L/min | 0.04 | 0.044 | 0.048 | 0.051 | 0.054 | 0.057 | 0.06 | 0.062 | 0.065 | 0.068 |
| US gpm | 0.011 | 0.012 | 0.013 | 0.013 | 0.014 | 0.015 | 0.016 | 0.017 | 0.017 | 0.018 | |
| 0.30 mm (0.012″) |
L/min | 0.068 | 0.075 | 0.081 | 0.086 | 0.091 | 0.096 | 0.101 | 0.105 | 0.11 | 0.114 |
| US gpm | 0.018 | 0.02 | 0.021 | 0.023 | 0.024 | 0.025 | 0.027 | 0.028 | 0.029 | 0.03 | |
| 0.40 mm (0.016″) |
L/min | 0.104 | 0.113 | 0.123 | 0.131 | 0.139 | 0.146 | 0.154 | 0.16 | 0.167 | 0.173 |
| US gpm | 0.027 | 0.03 | 0.032 | 0.035 | 0.037 | 0.039 | 0.041 | 0.042 | 0.044 | 0.046 | |
| 0.50 mm (0.020″) |
L/min | 0.114 | 0.125 | 0.135 | 0.144 | 0.153 | 0.161 | 0.169 | 0.176 | 0.183 | 0.19 |
| US gpm | 0.03 | 0.033 | 0.036 | 0.038 | 0.04 | 0.043 | 0.045 | 0.047 | 0.048 | 0.05 | |
| 0.60 mm (0.024″) |
L/min | 0.138 | 0.152 | 0.164 | 0.175 | 0.186 | 0.196 | 0.205 | 0.215 | 0.223 | 0.232 |
| US gpm | 0.037 | 0.04 | 0.043 | 0.046 | 0.049 | 0.052 | 0.054 | 0.057 | 0.059 | 0.061 | |
| 0.80 mm (0.032″) |
L/min | 0.165 | 0.181 | 0.195 | 0.209 | 0.221 | 0.233 | 0.245 | 0.256 | 0.266 | 0.276 |
| US gpm | 0.044 | 0.048 | 0.052 | 0.055 | 0.058 | 0.062 | 0.065 | 0.068 | 0.07 | 0.073 | |
| 1.00 mm (0.040″) |
L/min | 0.188 | 0.206 | 0.222 | 0.237 | 0.251 | 0.264 | 0.276 | 0.287 | 0.298 | 0.308 |
| US gpm | 0.05 | 0.054 | 0.059 | 0.063 | 0.067 | 0.07 | 0.073 | 0.076 | 0.079 | 0.081 | |
| 1.20 mm (0.048″) |
L/min | 0.207 | 0.227 | 0.245 | 0.262 | 0.278 | 0.293 | 0.307 | 0.32 | 0.332 | 0.343 |
| US gpm | 0.054 | 0.06 | 0.065 | 0.069 | 0.073 | 0.077 | 0.081 | 0.085 | 0.088 | 0.091 | |
All nozzles were tested at 1,000 psi using water at 70°F (21.1°C). The room humidity was between 40-50% during the tests. The patternation measurements were conducted using the SETscan OP600 patternator that can measure sprays up to a maximum diameter of 7″.
| Orifice | Contour based angle |
| 0.10 / .004″ | 19.90° |
| 0.15 / .006″ | 55.70° |
| 0.20 / .008″ | 72.50° |
| 0.30 / .012″ | 74.60° |
| 0.40 / .016″ | 82.00° |
| 0.50 / .020″ | 72.50° |
| 0.60 / .024″ | 91.00° |
| 0.80 / .032″ | 105.80° |
| 1.00 / .040″ | 106.90° |
| 1.20 / .048″ | 114.00° |