Description
Flow switch with probe Thanks to the high sensibility and minimal flow rate of intervention, it allows to run the "total stop" process even with machines that fit flow sensitive unloader valves.
This accessory can be installed only vertically. The water flow has to be directed as per the direction of the arrows in- scribed on the plastic casing of the flow switch.
Rated pressure: 5100 psi (350 bar)
Permissible pressure: 5650 psi (390 bar)
Max. flow rate for use in pump delivery: 15.9 US gpm (60 L/min)
Max flow rate for use in pump intake: 7.9 US gpm (30 L/min)
Max. working temperature: 165 °F (75 °C)
Max. voltage: 230 V
Max. switch capacity: 60 VA
Max. current strength: 3 A
Electric cable: 2x0,5 mmq. - 0
Cable length: 49.2″ (125 cm)
Electrical insulation: IP55
Inlet: ⅜″ F
Outlet: ⅜″ F
Min. operating flow rate (standing/vertical position): 0.1 US gpm (0.3 L/min)
Min. operating flow rate (standing/vertical position): 0.1 US gpm (0.3 L/min)
