Description
NOTE: This product ships only to the contiguous United States.
This pressure washer combines a 2 hp solid shaft electric motor and hollow shaft axial pump, delivering a max. output of up to 1,500 psi at 1.9 US gpm. Pressure washers with axial pumps are perfect for use cases where running times are shorter, like residential applications.
- Completely customizable with our professional line of accessories of spray guns, foam kits, turbo rotating nozzles and more
- Commercial-grade pump and motor fully serviceable through our line of spare parts and repair kits
- Integrated unloader valve (pressure regulator) included
Canpump motor specs
Power source: Single-Phase
Power: 2.0 hp (1.5 kW), NEMA 56C flange
Speed: 3,495 rpm
Voltage: 120 V
Current: 16 amp
Frequency: 60 Hz
Shaft: ⅝″ shaft with NEMA 56C flange
Canpump CH 2019 EH
Max. pressure: 1500 psi (96 bar)
Max. flow rate: 1.9 US gpm (7.2 L/min)
Pump mechanism: Axial plunger
Unloader valve: Integrated unloader valve
Inlet: ¾″ standard garden hose on unloader
Outlet: ⅜″ quick-connect on unloader
Oil grade: SAE 15W-40 oil
Included accessories
- Gun: M22
- Hose: 30ft M22 hose
- Nozzles: 5 quick-connect nozzle
Note: Please use nozzles of correct orifice size only, as determined based on the pressure and flow rate of your pressure washer using a nozzle chart. A nozzle with a larger orifice size will not produce the rated pressure but will not harm the pressure washer either. However, a smaller sized nozzle will create back pressure and put excessive load on the motor.
Additional Information
Mastering Electric Pressure Washers: Best Practices and Common Mistakes
