Name: Nicolini Electric Motor - 1.6 hp Single-Phase 120 V, 5/8-inch Shaft
Brand: Nicolini & C
SKU: 401000
Price: 540 USD
Availability: InStock

Description

Single-phase motors by Nicolini & C have a squirrel-cage rotor and stator winding which can be connected through the supplied terminal block to rotate clockwise or counterclockwise. Each motor is fully tested at the end line after production.

This motor comes mounted with a starting switch and a 6 feet long electrical wire (without plug).

Power source: Single-Phase
Power: 1.6 hp (1.2 kW)
Speed: 1,750 rpm
Voltage: 120 V
Current: 16 amp
Frequency: 60 Hz
Protection: IP55
Shaft: ⅝″ shaft

Extra Information

Brand:

Nicolini & C

Power:

1.6 hp

RPM:

Half speed

Voltage:

120 V

Current:

16 amp

Checking fitment with your existing equipment?

See which replacement parts we carry fit models from other brands in our Known Fitment Information .

Only models we’ve verified appear there—if your unit isn’t listed, it may still be compatible. Ask us below if you’re unsure.

Nozzle Size	Flow	Operating Pressure Range (psi)
Orifice	Flow rate	362	435	507	580	652	725	797	870	942	1015
0.15 mm (0.006″)	L/min	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.049	0.05
0.15 mm (0.006″)	US gpm	0.008	0.009	0.009	0.01	0.011	0.011	0.012	0.012	0.013	0.013
0.20 mm (0.008″)	L/min	0.04	0.044	0.048	0.051	0.054	0.057	0.06	0.062	0.065	0.068
0.20 mm (0.008″)	US gpm	0.011	0.012	0.013	0.013	0.014	0.015	0.016	0.017	0.017	0.018
0.30 mm (0.012″)	L/min	0.068	0.075	0.081	0.086	0.091	0.096	0.101	0.105	0.11	0.114
0.30 mm (0.012″)	US gpm	0.018	0.02	0.021	0.023	0.024	0.025	0.027	0.028	0.029	0.03
0.40 mm (0.016″)	L/min	0.104	0.113	0.123	0.131	0.139	0.146	0.154	0.16	0.167	0.173
0.40 mm (0.016″)	US gpm	0.027	0.03	0.032	0.035	0.037	0.039	0.041	0.042	0.044	0.046
0.50 mm (0.020″)	L/min	0.114	0.125	0.135	0.144	0.153	0.161	0.169	0.176	0.183	0.19
0.50 mm (0.020″)	US gpm	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.048	0.05
0.60 mm (0.024″)	L/min	0.138	0.152	0.164	0.175	0.186	0.196	0.205	0.215	0.223	0.232
0.60 mm (0.024″)	US gpm	0.037	0.04	0.043	0.046	0.049	0.052	0.054	0.057	0.059	0.061
0.80 mm (0.032″)	L/min	0.165	0.181	0.195	0.209	0.221	0.233	0.245	0.256	0.266	0.276
0.80 mm (0.032″)	US gpm	0.044	0.048	0.052	0.055	0.058	0.062	0.065	0.068	0.07	0.073
1.00 mm (0.040″)	L/min	0.188	0.206	0.222	0.237	0.251	0.264	0.276	0.287	0.298	0.308
1.00 mm (0.040″)	US gpm	0.05	0.054	0.059	0.063	0.067	0.07	0.073	0.076	0.079	0.081
1.20 mm (0.048″)	L/min	0.207	0.227	0.245	0.262	0.278	0.293	0.307	0.32	0.332	0.343
1.20 mm (0.048″)	US gpm	0.054	0.06	0.065	0.069	0.073	0.077	0.081	0.085	0.088	0.091

Orifice	Contour based angle
0.10 / .004″	19.90°
0.15 / .006″	55.70°
0.20 / .008″	72.50°
0.30 / .012″	74.60°
0.40 / .016″	82.00°
0.50 / .020″	72.50°
0.60 / .024″	91.00°
0.80 / .032″	105.80°
1.00 / .040″	106.90°
1.20 / .048″	114.00°

Nicolini Electric Motor - 1.6 hp Single-Phase 120 V, 5/8-inch Shaft

Nicolini & C

Description

Extra Information

Checking fitment with your existing equipment?

Related Products

Nicolini Electric Motor - 4 hp Single-Phase 240 V, 5/8-inch Shaft

Canpump Electric Motor - 2 hp Single-Phase 120 V, NEMA 56C 5/8-inch Shaft

Canpump Electric Motor - 5 hp Single-Phase 240 V, NEMA 56C 5/8-inch Shaft

Canpump Electric Motor - 5 hp Single-Phase 240 V, NEMA 184TC 1-1/8-inch Shaft

Canpump Electric Motor - 7.5 hp Single-Phase 240 V, NEMA 184TC 1-1/8-inch Shaft

Pressure Washer Nozzle Size

Helpful Tips

Misting Nozzle Charts

Misting Nozzle Size Chart

Misting Nozzle Spray Angle

Flow Rate Calculator

Helpful Tips