Description

Thanks to the flow switch's high sensitivity and minimal flow rate of intervention, it allows to run the "total stop" process even with machines that fit flow sensitive unloader valves.

This accessory can be installed only vertically. The water flow has to be directed as per the direction of the arrows in- scribed on the plastic casing of the flow switch.

Rated pressure: 5100 psi (350 bar)

Permissible pressure: 5650 psi (390 bar)

Max. flow rate for use in pump delivery: 15.9 US gpm (60 L/min)

Max flow rate for use in pump intake: 7.9 US gpm (30 L/min)

Max. working temperature: 165 °F (75 °C)

Max. voltage: 240 V

Max. switch capacity: 60 VA

Max. current strength: 3 A

Electric cable: 2x0,5 mmq. - 0

Cable length: 49.2″ (125 cm)

Electrical insulation: IP55

Inlet: ⅜″ F

Outlet: ⅜″ F
Min. operating flow rate (standing/vertical position): 0.1 US gpm (0.3 L/min)
MPN: 28.0430.00

Additional Information

User Manual

Operating Manual

Total Stop System with Flow Sensitive Unloader Valves

Nozzle Size	Flow	Operating Pressure Range (psi)
Orifice	Flow rate	362	435	507	580	652	725	797	870	942	1015
0.15 mm (0.006″)	L/min	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.049	0.05
0.15 mm (0.006″)	US gpm	0.008	0.009	0.009	0.01	0.011	0.011	0.012	0.012	0.013	0.013
0.20 mm (0.008″)	L/min	0.04	0.044	0.048	0.051	0.054	0.057	0.06	0.062	0.065	0.068
0.20 mm (0.008″)	US gpm	0.011	0.012	0.013	0.013	0.014	0.015	0.016	0.017	0.017	0.018
0.30 mm (0.012″)	L/min	0.068	0.075	0.081	0.086	0.091	0.096	0.101	0.105	0.11	0.114
0.30 mm (0.012″)	US gpm	0.018	0.02	0.021	0.023	0.024	0.025	0.027	0.028	0.029	0.03
0.40 mm (0.016″)	L/min	0.104	0.113	0.123	0.131	0.139	0.146	0.154	0.16	0.167	0.173
0.40 mm (0.016″)	US gpm	0.027	0.03	0.032	0.035	0.037	0.039	0.041	0.042	0.044	0.046
0.50 mm (0.020″)	L/min	0.114	0.125	0.135	0.144	0.153	0.161	0.169	0.176	0.183	0.19
0.50 mm (0.020″)	US gpm	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.048	0.05
0.60 mm (0.024″)	L/min	0.138	0.152	0.164	0.175	0.186	0.196	0.205	0.215	0.223	0.232
0.60 mm (0.024″)	US gpm	0.037	0.04	0.043	0.046	0.049	0.052	0.054	0.057	0.059	0.061
0.80 mm (0.032″)	L/min	0.165	0.181	0.195	0.209	0.221	0.233	0.245	0.256	0.266	0.276
0.80 mm (0.032″)	US gpm	0.044	0.048	0.052	0.055	0.058	0.062	0.065	0.068	0.07	0.073
1.00 mm (0.040″)	L/min	0.188	0.206	0.222	0.237	0.251	0.264	0.276	0.287	0.298	0.308
1.00 mm (0.040″)	US gpm	0.05	0.054	0.059	0.063	0.067	0.07	0.073	0.076	0.079	0.081
1.20 mm (0.048″)	L/min	0.207	0.227	0.245	0.262	0.278	0.293	0.307	0.32	0.332	0.343
1.20 mm (0.048″)	US gpm	0.054	0.06	0.065	0.069	0.073	0.077	0.081	0.085	0.088	0.091

Orifice	Contour based angle
0.10 / .004″	19.90°
0.15 / .006″	55.70°
0.20 / .008″	72.50°
0.30 / .012″	74.60°
0.40 / .016″	82.00°
0.50 / .020″	72.50°
0.60 / .024″	91.00°
0.80 / .032″	105.80°
1.00 / .040″	106.90°
1.20 / .048″	114.00°

P.A. FL7 MS: 3/8-in F Sensitive Flow switch w/ Probe, 5100 psi, 240 V

P.A.

Description

Additional Information

Extra Information

Related Products

P.A. FL7: 3/8-in F Flow Switch w/ Probe, 5100 psi, 240 V

P.A. FL12: 3/4-in F Flow Switch w/ Probe, 4000 psi, 240 V

P.A. FL3: 3/8-in M Flow Switch w/ Probe, 3650 psi, 240 V

P.A. TR2: Thermostat w/ External Probe, 240 V, 16 A

P.A. UR32: 1/4-in F Brass Rotating Nozzle, 5100 psi

Pressure Washer Nozzle Size

Helpful Tips

Misting Nozzle Charts

Misting Nozzle Size Chart

Misting Nozzle Spray Angle