Description
The CE 3650 GB/CE 3650 GBP sits at the very top-end our premium 18 mm plunger pumps for direct-drive gas engines. With a gearbox effectively halving the RPMs coming out of the engine, pump life is extended significantly.
Detachable unloader valves make replacements and upgrades a cinch. Choose from either the standard unloader valve or a premium extended bypass unloader kit, which allows water to stay cooler for longer and increases the amount of time you can run a pressure washer in bypass mode without spraying.
- Model: CE 3650 GB/CE 3650 GBP
- Pressure: 3600 psi (248 bar)
- Flow rate: 4.4 US gpm (16.7 L/min)
- Power: 13 hp
- RPM: Gearbox reduction 3,400–1,560 rpm
- Pump mechanism: Triplex plunger
- Pump Inlet: ½″ NPT F
- Pump Oulet: ⅜" NPT F
- Includes: Detergent tube with strainer and operating manual with spare parts list
- Oil grade: SAE 15W-40 oil
- Compatibility: Standard SAE J609 mounting flange for up to 13 hp direct-drive gasoline engines with 1″ horizontal shafts
Options
- Standard unloader valve: Detachable (bolt-on) unloader valve; pressure-adjustable with 20:1 detergent injector and built-in water filter
- Premium unloader kit: Detachable (bolt-on) Italian-made unloader valve by PA SpA with extended bypass; pressure-adjustable with built-in water filter (no detergent injector)
*The flange should be flush to engine when fully seated to avoid damage while tightening bolts. If not flush when fully seated on shaft, then spacers are required.
