Description
NOTE: This product requires shipping by freight and is only available for shipping within the contiguous united states.
This commercial heavy-duty pressure washer features a roll cage chassis with a 22 horsepower Honda V-twin engine mated to a gearbox-driven 2200 psi triplex pump with a stainless-steel manifold—a setup for applications that demand pressure beyond what brass manifolds can deliver.
- Honda V-Twin engine delivers high horsepower, excellent adaptability, quiet operation, and impressive fuel efficiency.
- Canpump heavy-duty triplex direct-drive pump from the 28 mm plunger series is built for applications requiring high flow rates.
- Fully customizable with our professional line of accessories, including spray guns, foam kits, turbo rotating nozzles, and more.
Gearbox Drive for Heavy-Duty Cleaning
This pressure washer is equipped with a gearbox drive system, which reduces the pump’s operating speed well below that of direct drive units. While direct drive machines typically run the pump at around 3400 rpm, gearbox-driven models operate at much lower speeds — often between 1500 and 1750 rpm, depending on the configuration. This slower speed reduces wear and heat, resulting in longer pump life and making the unit ideal for commercial use and extended cleaning sessions.
Max. pressure: 2200 psi (150 bar)
Max. flow rate: 15 US gpm (56.7 L/min)
Pump: Canpump CTX 2215 GB
Engine: Honda GX 630
Engine Starter: Electric
Unloader valve: Detachable (bolt-on) unloader valve
Unloader Inlet: ½″ NPT F
Unloader Bypass: ½″ NPT F
Unloader Outlet: ½″ NPT F
RPM before/after reduction: 3600/1560
Oil grade: SAE 80W-90 or greater gear oil
Max. flow rate: 15 US gpm (56.7 L/min)
Pump: Canpump CTX 2215 GB
Engine: Honda GX 630
Engine Starter: Electric
Unloader valve: Detachable (bolt-on) unloader valve
Unloader Inlet: ½″ NPT F
Unloader Bypass: ½″ NPT F
Unloader Outlet: ½″ NPT F
RPM before/after reduction: 3600/1560
Oil grade: SAE 80W-90 or greater gear oil
