Name: Canpump Gearbox for 1-1/8 in Engine Shafts
Brand: Canpump
SKU: G210045
Price: 215 USD
Availability: InStock

Description

Compatible pump models: CE 5261 S, CE 5261 ST, CE 5261 ST-HW, CT 3510 S, CTX 2215 S, CTX 2215 ST

Reduction Ratio: 1:2.18
Engine Shaft: 1⅛″
Pump Shaft: 24 mm
Fits to Engine: 9-33 hp
Oil Type: SAE 90 / 80W90

Caution: For correct use check the rotation speed of the engine and never exceed the max RPM rate indicated on the pump.

*The flange should be flush to engine when fully seated to avoid damage while tightening bolts. If not flush when fully seated on shaft, then spacers are required.

Videos

Extra Information

Brand:

Canpump

Checking fitment with your existing equipment?

See which replacement parts we carry fit models from other brands in our Known Fitment Information .

Only models we’ve verified appear there—if your unit isn’t listed, it may still be compatible. Ask us below if you’re unsure.

Canpump Gearbox for 1-in Engine Shafts

$190.00 - $210.00

Choose Options

Canpump

SKU: 210040

Flange Plate for Canpump 1-1/8-in Gearbox

$35.00

Only 3 in stock

Canpump

SKU: 321018

Canpump CE 5066 GB8: 5000 psi @ 6.6 US gpm, 1-1/8 in Shaft Industrial High-Pressure Pump w/ Gearbox

Model: CE 5066 GB8

Pressure: 5,000 psi (220 bar)

Flow rate: 6.6 US gpm (25 L/min)

Power: 24 hp

RPM: Gearbox reduction

$850.00

Only 1 in stock

Canpump

Canpump CT 4066 GB: 4000 psi @ 6.61 US gpm, 1-in Shaft Pressure Washer Pump w/Gearbox

Model: CT 4066 GB

Pressure: 4,000 psi (275 bar)

Flow rate: 6.61 US gpm (25.0 L/min)

Power: 22 hp

RPM: Gearbox reduction

$640.00 - $720.00

Choose Options

Nozzle Size	Flow	Operating Pressure Range (psi)
Orifice	Flow rate	362	435	507	580	652	725	797	870	942	1015
0.15 mm (0.006″)	L/min	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.049	0.05
0.15 mm (0.006″)	US gpm	0.008	0.009	0.009	0.01	0.011	0.011	0.012	0.012	0.013	0.013
0.20 mm (0.008″)	L/min	0.04	0.044	0.048	0.051	0.054	0.057	0.06	0.062	0.065	0.068
0.20 mm (0.008″)	US gpm	0.011	0.012	0.013	0.013	0.014	0.015	0.016	0.017	0.017	0.018
0.30 mm (0.012″)	L/min	0.068	0.075	0.081	0.086	0.091	0.096	0.101	0.105	0.11	0.114
0.30 mm (0.012″)	US gpm	0.018	0.02	0.021	0.023	0.024	0.025	0.027	0.028	0.029	0.03
0.40 mm (0.016″)	L/min	0.104	0.113	0.123	0.131	0.139	0.146	0.154	0.16	0.167	0.173
0.40 mm (0.016″)	US gpm	0.027	0.03	0.032	0.035	0.037	0.039	0.041	0.042	0.044	0.046
0.50 mm (0.020″)	L/min	0.114	0.125	0.135	0.144	0.153	0.161	0.169	0.176	0.183	0.19
0.50 mm (0.020″)	US gpm	0.03	0.033	0.036	0.038	0.04	0.043	0.045	0.047	0.048	0.05
0.60 mm (0.024″)	L/min	0.138	0.152	0.164	0.175	0.186	0.196	0.205	0.215	0.223	0.232
0.60 mm (0.024″)	US gpm	0.037	0.04	0.043	0.046	0.049	0.052	0.054	0.057	0.059	0.061
0.80 mm (0.032″)	L/min	0.165	0.181	0.195	0.209	0.221	0.233	0.245	0.256	0.266	0.276
0.80 mm (0.032″)	US gpm	0.044	0.048	0.052	0.055	0.058	0.062	0.065	0.068	0.07	0.073
1.00 mm (0.040″)	L/min	0.188	0.206	0.222	0.237	0.251	0.264	0.276	0.287	0.298	0.308
1.00 mm (0.040″)	US gpm	0.05	0.054	0.059	0.063	0.067	0.07	0.073	0.076	0.079	0.081
1.20 mm (0.048″)	L/min	0.207	0.227	0.245	0.262	0.278	0.293	0.307	0.32	0.332	0.343
1.20 mm (0.048″)	US gpm	0.054	0.06	0.065	0.069	0.073	0.077	0.081	0.085	0.088	0.091

Orifice	Contour based angle
0.10 / .004″	19.90°
0.15 / .006″	55.70°
0.20 / .008″	72.50°
0.30 / .012″	74.60°
0.40 / .016″	82.00°
0.50 / .020″	72.50°
0.60 / .024″	91.00°
0.80 / .032″	105.80°
1.00 / .040″	106.90°
1.20 / .048″	114.00°

Canpump Gearbox for 1-1/8 in Engine Shafts

Canpump

Description

Videos

Extra Information

Checking fitment with your existing equipment?

Related Products

Canpump Gearbox for 1-in Engine Shafts

Flange Plate for Canpump 1-1/8-in Gearbox

Canpump CE 5066 GB8: 5000 psi @ 6.6 US gpm, 1-1/8 in Shaft Industrial High-Pressure Pump w/ Gearbox

Canpump CT 4066 GB: 4000 psi @ 6.61 US gpm, 1-in Shaft Pressure Washer Pump w/Gearbox

Pressure Washer Nozzle Size

Helpful Tips

Misting Nozzle Charts

Misting Nozzle Size Chart

Misting Nozzle Spray Angle

Flow Rate Calculator

Helpful Tips